High Grade Prepainted Galvanized Steel Coil for Roofing Use
High Grade Prepainted Galvanized Steel Coil for Roofing Use
Feature
-
A lightweight Prepainted Galvanized Steel Coil with a baked organic finish that resists rust and takes direct processing, built for roofing and cladding programs where consistent colour and dependable delivery count more than last-minute bargains. It is supplied as a Colour Coated Coil in RAL shades or customer-matched colours, with thickness, width and coil weight set around your forming line rather than around standard stock sizes. A Prepainted Steel Coil should arrive flat, even and ready to form, and that is the check made at the decoiler before the first panel runs.
The material starts as galvalume steel. After surface pretreatment — chemical degreasing and chemical conversion treatment — one or several layers of organic coating are applied and then baked and cured. The alu-zinc layer underneath keeps doing its protective job, while the organic coating covers and protects the Colour Coated Coil from rusting; field records put the service life at about 1.5 times longer than that of a bare galvalume steel coil, and that multiplier is why a Colour Coated Coil keeps its place on the purchasing list, which is the figure most roofing estimators actually budget around. As a Ppgi Coil Manufacturer, ZZ Group coordinates the base metal, the coating line and the slitting against one order file, so a Prepainted Steel Coil that starts at the mill arrives at your decoiler with the same batch record attached. That single-line control also means the alu-zinc weight and the film build are set in the same plant, which keeps the finished Ppgi Steel Coil within the tolerances printed on the mill certificate. You name the grade, the RAL number, the thickness, the width, the film build and the coating type; the run is scheduled around those figures instead of around whatever is left in the warehouse. That is the practical difference between buying from a stocking trader and buying direct from a Ppgi Coil Manufacturer who controls the coating step itself. That is also why edge definition is stable: the slitting happens on the same Colour Coated Coil line, so the cut edge and the coating finish are checked against the same Ppgi Steel Coil spec sheet before anything leaves the floor.
1.Standard: AISI, ASTM, BS, DIN, GB, JIS
2.Grade:Dx51d, G550, S350GD, all according to the customer's request
3.Color: RAL color or according to customer's sample
4.Thickness: 0.12mm-0.4mm, all available
5.Width: customized
6. Length: according to per customer's requirement
7.Coil ID: 508/610mm
8. Coil weight: according to per customer's requirement
9.Alu-zinc coating:40-275 g/m2
10.Film: 15/5 um, or as per customer's requirement
11.Type of coating: PE, HDP, SMP, PVDF
12.Structure of Prepainted Galvalume Steel Coil:
*Topcoat (finishing) which provides color, pleasing appearance and appearance and a barrier film to enhance long-term durability.
*Primer coat to prevent undercutting of paint and enhance corrosion resistance.
*Pretreatment layer applied for good adhesion and to enhance corrosion resistance. *Base steel sheet.
● Light weight with an even, clean finish that keeps its appearance over time, which matters when the panel is going up high and stays in view for years, and it is the first thing checked on a Ppgi Steel Coil delivery.
● Good anti-corrosion performance, thanks to the zinc protection plus the organic coating on the surface, so the Prepainted Galvanized Steel Coil holds up in coastal and humid sites.
● Can be processed directly — cut, punched and roll formed without pre-treatment, which suits contractors forming panels on site. The Prepainted Steel Coil arrives ready for the line, so a crew does not add a degreasing step between the decoiler and the former.
● Service life about 1.5 times longer than that of galvanized strip, which is the benchmark buyers use when they weigh a Prepainted Steel Coil against bare sheet.
● Suitable resins are selected for the coatings used in color coated rolls according to different use environments, such as polyester-silicon modified polyester, polyvinyl chloride plastisol, polyvinylidene chloride, and the user can choose according to the purpose. Each Colour Coated Coil coating type is matched to the site, which keeps the resin list from becoming a guessing game.
● Main uses cover advertising, construction, household appliances, electrical appliances, furniture and transportation, and the same Prepainted Galvanized Steel Coil grade list covers most of these jobs.
● Longer working life: the organic coating covers and protects the steel so it does not rust, and the service life runs about 1.5 times longer than that of a galvalume steel coil, so the extra cost of the painted finish pays for itself on the first reroofing cycle, which is the figure a Prepainted Steel Coil buyer puts into the life-cycle calculation.
● Direct processing on site: no degreasing or pre-treatment needed; the Prepainted Steel Coil goes straight from the decoiler into the roll former, which cuts handling time on the floor.
● Colour control: RAL color or customer's sample, so every Colour Coated Coil delivery matches the shade approved at order time, including repeat shipments in the same project. A Ppgi Steel Coil re-order pulls the archived shade, so the second delivery matches the first.
● Spec freedom: thickness 0.12mm-0.4mm all available, width and coil weight customized, coil ID 508/610mm to suit common decoiler setups, and the grade itself follows the customer's request. The Ppgi Steel Coil grade list covers the common build specs, so a tender does not stall on a grade the mill has never run.
● Coating options: PE, HDP, SMP and PVDF, with film 15/5 um as the standard build.
Most of the volume lands in the six sectors listed above, and the coating selection follows the environment the panel will face. Because every Ppgi Coil Manufacturer order starts from the same standard list, buyers can hold several application programs on one Prepainted Galvanized Steel Coil contract and still call off different coating types per job. One Colour Coated Coil contract can run across several projects, with each call-off stating its own RAL shade and film build:
● Roofing: forming roof sheets and cladding panels for workshops, warehouses and low-rise buildings, where a Colour Coated Coil needs to hold its shade for years. A Prepainted Steel Coil with a proven film build saves whole repainting schedules on a workshop roof, which is where the paint cost pays itself back.
● Advertising: billboard panels, signboards and display structures, where a consistent Ppgi Steel Coil surface keeps the printed face even across large panels.
● Construction: internal linings, partitions and enclosure panels, usually written as a standard Prepainted Galvanized Steel Coil finish.
● Household appliances: shells, back panels and casings that need a colour finish.
● Electrical appliances: cabinets and housings.
● Furniture: shelving, storage units and office fittings.
● Transportation: vehicle body panels and container linings, where a durable Ppgi Steel Coil surface saves a separate painting step.
Q: What is PPGL steel coil made of?
A: PPGL steel coil is made of galvalume steel, so the base of a Prepainted Galvanized Steel Coil already carries the alu-zinc protection. After surface pretreatment (chemical degreasing and chemical conversion treatment), one or several layers of organic coating are coated on the surface, and then baked and cured. That Prepainted Galvanized Steel Coil sequence — base, pretreatment, primer, topcoat — is the same order shown in the structure list below.
Q: How long does it last compared with bare galvalume?
A: The organic coating covers and protects the steel so it does not rust; service life is about 1.5 times longer than that of a galvalume steel coil, and that is the number most roof buyers compare when they price a Prepainted Galvanized Steel Coil against uncoated stock.
Q: What thickness and width can I order?
A: Thickness 0.12mm-0.4mm, all available; width, length and coil weight follow the customer's requirement, and coil ID is 508/610mm. Orders can be built on a standard Prepainted Galvanized Steel Coil spec, then trimmed to the decoiler setup without moving to a new product family.
Q: Which coating types are offered?
A: PE, HDP, SMP and PVDF; the suitable resin is selected according to the use environment, such as polyester-silicon modified polyester, polyvinyl chloride plastisol and polyvinylidene chloride. The Prepainted Steel Coil finish is then chosen by environment — coastal, industrial or interior — before the film build is fixed.
Q: Which standards do you produce to?
A: AISI, ASTM, BS, DIN, GB, JIS; grades such as Dx51d, G550 or S350GD are all arranged according to the customer's request. A Prepainted Galvanized Steel Coil order can follow the local building code of the destination country, since the standard set already covers AISI, ASTM, BS, DIN, GB and JIS.
Q: Can you match a specific RAL shade?
A: Yes. Color is supplied as RAL color or according to the customer's sample, so the Colour Coated Coil matches the approved shade, and one Ppgi Coil Manufacturer batch keeps the tone across the whole run.
Application
As China metal materials industry leading enterprises, the national steel trade and logistics "Hundred good faith enterprise",China steel trade enterprises, "Top 100 private enterprises in Shanghai”. Shanghai Zhanzhi industry Group Co., Ltd.,(shorted to Zhanzhi Group) takes the" Integrity, Practicality, Innovation, Win-Win " as its sole operation principle, always persist in putting the customer demand in the first place.
- INTEGRITY
- WIN-WIN
- PRAGMATIC
- INNOVATION
